China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

car key programmer
Home >  News & Notices >  EURO6 Adblue Emulator Adblue System EURO6 Trucks simulation Test

Knowledgebase

Search your questions?


EURO6 Adblue Emulator Adblue System EURO6 Trucks simulation Test

                                                       EURO6 Adblue Emulator Adblue System EURO6 Trucks simulation Test Device

MAN EURO 6 Adblue emulator OBD2 EURO 6 Trucks Adblue System Simulation Device, not use to MAN Truck, also support DAF, VOLVO Scania trucks and other Euro6 transport. Do you know how to use Adblue Euro6 Emulator?

AdBlue Truck Emulator EURO6 Adblue Truck system Simulation Device Adblue Euro 6 Truck simulator
EURO6 AdBlue Truck system simulator
EURO6 AdBlue Emulators using guide:
Emulator Man Euro 6 not need to be learned. We Mount emulator under the metal cover of AdBlue Pump. On the right side behind the cab. We need disconnect plug from AdBlue Pump and connect emulator.

Next we need to remove the fuses:
F894(Multisensor In AdBlue tank)
F738 (+30 Signal of AdBlue pump)
F1084(NOx sensor Upstream)

Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of NOx sensor Downstream and A1191 mufler temperature sensor. This sensor need to work correctly for DPF regenaration.

The last thing that we need to do is remove Power from NOx downstream sensor. There is two way to do that. Cut pin 1 in NOx sensor plug. The second way (better) is remove pin 10 in X3212 plug. This plug is visible on rear of engine, right side. This is TE plug (16 pin) wiht yellow key.

VXDAS VX09