China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

car key programmer
Home >  News & Notices >  How to Configuration network for Win 7 version MB SD C4?

Knowledgebase

Search your questions?


How to Configuration network for Win 7 version MB SD C4?

                                                 How to Configuration network for Win 7 version MB SD C4?


Mercedes SD C4 car, truck diagnose programming tool Cracked 2015.12 version software. The MB SD C4 newest version 2015.12 Mercedes software run on win 7 system, include Vediamo 06.00.06 engineer programming software. Below, I will sharing MB SD C4 network configuration guide to you.
2015.12 mb sd c4 mercedes diagnostic tool
C4 cable network configuration
1. IP configuration cable network
Open the network sharing center, right-click on the local network, attribute, select Internet protocol version 4 (TCP/IPv4), click properties,
Change the IP address is fixed
IP address: 172.29.127.100 (or 100 or more)
Subnet mask: 255.255.255.0
The default gateway: no need to change

2. Use green lan cable connect c4 device and computer, the connection is successful after X will disappear in the lower-right corner of the window

3. Configure the wireless network, don't disconnect cables  connection mb sd c4 and laptop
first, configuration mb sd c4 device IP, right click button,
adminstration-- Register/confirgure --- wlan parameters, road

Detail 2015.12 MB SD C4 NETWORK configure manual, please contact obd2motor or visit our facebook https://www.facebook.com/obddiagnosticcenter .


VXDAS VX09