China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

car key programmer
Home >  News & Notices >  V14.9 T300 key programmer T300 transponder programming tool

Knowledgebase

Search your questions?


V14.9 T300 key programmer T300 transponder programming tool

                                                       V14.9 T300 key programmer T300 transponder programming tool


T300 key programmer update 14.9 version from v14.2 T300 transponder programmer. Hand-held T300 chip decoder support read IMMO/ECU ID, vehicle malfunction code and system data stream. Below, I will share with you V14.9 T300 key programmer operation guide.
T300 key programmer v14.9 t300 china transponder programming tool
How to operation newest China T300 key programmer V14.9?
Switch ignition ON with new key. Select:  Immobilizer -> Login

Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).

For example, if your Login is 1234, enter 1234.

Save

Go to Adaptation

Enter 01 in "Channel Number"

Enter

The "Stored Value" is the number of keys currently matched.

Enter number corresponding to the total number of keys to be matched, - for ex  2 ;

Enter -> Save

Switch ignition off and remove key

Insert next key to ignition and switch ignition on again

Wait 15 sec. Repeat this step with each key until all keys have been matched.

Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation

Enter 00 in "Channel Number"

Enter 0 and Save. This will learn ECU with Immobiliser.


VXDAS VX09