China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

car key programmer
Home >  News & Notices >  T300 key programmer V14.9 T300 car key maker how to use

Knowledgebase

Search your questions?


T300 key programmer V14.9 T300 car key maker how to use

                                                     T300 key programmer V14.9 T300 car key maker how to use


Automan T300 key programmer V14.9 software version already reased, hand-held T300 transponder programmer V14.9 can used to more than 28 brands vehicles. How to use T300 programming car keys? Than old T300, the v14.9 T300 key maker have what advantage?

V14.9 T300 key programmer 14.9 T300 transponder programming tool
t300 key programmer v14.9 t300 transponder programmer

V14.9 T300 key code scanner is the latest version, which is 2014 full, add more cars than old version. Use for key programming. More cars than any other transponder machine .

T300 key programmer v14.9 Install and Operate Steps:

VW Transponder key matching with 5 digits Login Code

1. Procedure for adding transponder keys to vehicles with separate Immobilizer box:
(Golf 3, Passat B4, Transporter, Lupo, Sharan)
Switch ignition ON with new key. Select:  Immobilizer -> Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 1234.
Save
Go to Adaptation
Enter 01 in "Channel Number"
Enter
The "Stored Value" is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched, - for ex  2 ;
Enter -> Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation
Enter 00 in "Channel Number"
Enter 0 and Save. This will learn ECU with Immobiliser.

2. Procedure for adding transponder keys to vehicles with Immobilizer in the instrument cluster:
(Golf 2004, Passat B5, B6 )

Switch ignition ON with new key. Select:  Instrument -> Login
Enter 5 numbers Login Code (add 0 if you have 4 digits Login Code).
For example, if your Login is 1234, enter 01234.
Save
Go to Adaptation
Enter 21 in "Channel Number"
Enter
The "Stored Value" is the number of keys currently matched.
Enter number corresponding to the total number of keys to be matched, - for ex  2 ;
Enter -> Save
Switch ignition off and remove key
Insert next key to ignition and switch ignition on again
Wait 15 sec. Repeat this step with each key until all keys have been matched.
Select:  Immobilizer -> Login. Enter Login Code. Go to Adaptation
Enter 00 in "Channel Number"
Enter 0 and Save. This will learn ECU with Immobiliser.

Any question or want know more T300 key programmer 14.9, pls visit http://www.obddiagnosticcenter.com or contact obd2motor@hotmail.com .


VXDAS VX09