China Auto Diagnostic Tools, OBD2 Scanner Wholesale Center

car key programmer
Home >  News & Notices >  Installation and Using of GM TECH2 Vehicle diagnostic kit

Knowledgebase

Search your questions?


Installation and Using of GM TECH2 Vehicle diagnostic kit

                                                          Installation and Using of GM TECH2 Vehicle diagnostic kit


GM TECH2 diagnostic kit with software support capture stored DTCs, Freeze Frame and Failure record for later review. The GM TECH 2 programmer have GM, OPEL, SUZUKI, SAAB, ISUZU, Holden software to choose, default software is 32mb card with gm diagnostic software.
gm tech2 programmer
Super GM TECH2 programmer GM tech 2 diagnostic kit

China obddiagnosticcenter.com offer these different 32mb card for gm tech2 programmer software, do you how to use gm mdi2 vehicls diagnostic kit? Here, we will share it with you.

1) Connect CANdi interface to the vehicle via 12 PIN ALDL connector



2) Run and complete all GM tech 2 scanner stand-alone self-test. Disconnect CANdi interface when run Tech2 scan tool self test.
3) Run VCI self test. If the VCI self-test fails, replace VCI module. Disconnect CANdi interface when run VCI self test
4) Connect the CANdi module to an existing VCI module via DLC cable, and connect VCI module with vehicle. Make sure there is good connection between scanner and vehicle. Verify that the LED on the CANdi module is flashing.
5) After well connected with vehicle and Tech2 main unit, power up the GM Tech2 scan tool, the scanner is flashing. Software update procedure will display on the screen.
6) Browse to “Tool Options” menu, select “F9 CANdi Diagnostics” option in the function list.
7) Two options available under CANdi Diagnostics menu: POST Test and Self Test
8) First run a POST Test, here is the POST Results figure. The CANdi POST result is used to determine if the module has any problems during the software upgrade or start-up sequence.
9) Then run Self Test, here is the CANdi Self Test Results figure

Have any question or advice, please feel free contact Elena of www.obddiagnosticcenter.com website or send mail to obd2motor@hotmail.com, I will glad to share with you more obd2 auto diagnostic tool, car key programmer, ECU tuning tool... etc.


VXDAS VX09